Conveyor Rollers to heavy use



Our heavy use conveyor rollers are used in pallet conveyors,
packacing lines, cargo handling, steel mills, areas where roll
are subject to heavy weights, impacts, and temperature changes.
Rolls are made from steel pipe with various wall thicknesses.

Roll can equipped with sprocket, or belt drive. Commonly coating
is zinc-plating.


You can change dimensioning with certain limits:

Dimensions according to A or B, can freely change.
Sprocket dimensions are standardized. Other shaft dimensions can
also use, please consult us for these.

Shaft thread is common, M10x20. We can also make different threads,
and fixing type, ie. flat bar ends etc. You can hear more of these
changes, please take contact to us.



Rolls without drive


All our heavy use rolls, shaft diameter is Ø20 mm, except
Ø108 mm roll, where shaft diameter is Ø25 mm.
We use 6004,6204 or 6205 standard ball bearins, type 2RS is
commonly used.

We can also use thicker tubes, to steel mills etc.

You can find schematics from right side:

Ø 60,3 conveyor roll ( 63vapaa.pdf )

Ø 76,1 
conveyor roll ( 76vapaa.pdf )

Ø 88,9 
conveyor roll ( 89vapaa.pdf )

Ø 108 
conveyor roll ( 108vapaa.pdf )


Rolls with sprockets / belt drives

Rolls equipped with sprocket, have also Ø20 mm shaft size,
except Ø108 mm roll, where shaft size is Ø25 mm.
Electric zinc coating is commonly used, and ball bearing are
standard size, 6004,6204 or 6205, type 2RS.
Type 2ZZ can also use.

Sprocket can be either in end of roll, or in mantle of roll.
We use can use almost all kind of sprockets, but sizes and types
mentioned here are commonly used.
These types are in stock in Finland.

We also manufacture rolls with belt drive. Types are SPZ or SPA.
Belt is about 2 millimeters below roller surface, to maximize rolll use.

Standard size we use are:

1/2"x5/16"        5/8"x3/8"        3/4"x7/16"
08B-1-2 / 2x     10B-1-2 / 2x    12B1-2 / 2x


Toothcount varies from Z14 to Z23. Others can also use, with
limits..

Schematics Ø60,3 mm rolls with sprockets
1/2" x 5/16"

1-rivinen, Z13, myös 2-rivisenä
1-row, found also  with 2 row type
1-rivinen, Z15
1-row
2:lle erilliselle ketjulle, Z17
for 2 different chains
2:lle erilliselle ketjulle, Z15
for 2 different chains


Other

Hihnavetoinen
Belt drive




Schematics Ø76,1 mm rolls with sprockets
1/2" x 5/16"


2:lle erilliselle ketjulle, Z17
for 2 different chains
2:lle erilliselle ketjulle, Z15
for 2 different chains
2 ketjupyörää vaipan päälle, Z23
for 2 different chains on mantle

5/8" x 3/8"

2:lle erilliselle ketjulle, Z15
for 2 different chains

Others

Hihnavetoinen
Belt drive



Schematics Ø88,9 mm rolls with sprockets
1/2" x 5/16"

2:lle erilliselle ketjulle, Z17
for 2 different chains
2:lle erilliselle ketjulle, Z15
for 2 different chains

5/8" x 3/8"

2:lle erilliselle ketjulle, Z15
for 2 different chains

3/4" x 7/16"

2:lle erilliselle ketjulle, Z14
for 2 different chains
1 ketjupyörä vaipan päälle, Z19
for 1 chains
2 ketjupyörää vaipan päälle, Z19
for 2 different chains

Others

Hihnavetoinen
Belt drive
Ohjainlaippa
Parcel guider


Schematics  Ø108 mm rolls with sprockets
1/2" x 5/16"

2:lle erilliselle ketjulle, Z17
for 2 different chains
5/8" x 3/8"

2:lle erilliselle ketjulle, Z17
for 2 different chains
2:lle erilliselle ketjulle, Z15
for 2 different chains
3/4" x 7/16"

2:lle erilliselle ketjulle, Z14
for 2 different chains

Others

Hihnavetoinen
Belt drive








Download all schematics to your hard drive!

 (needs ie. WinZip to decompress...)
Blue Steel Oy, Filppulantie 20, 27510 Eura © 2011 Blue Steel Oy. All rights reserved